WEN DS164 20-Piece Sanding Drum Kit for Drill Presses and Power Drills

Description

Remember when you could smooth out those jagged curves? Take on edges, contours, holes, insides, outsides and whatever other sides with the WEN 20-Piece Sanding Drum Kit. Simply pop the 1/4-inch shank of your sanding drum into your preferred chuck, then get to sanding. This package includes one 1/2-inch sanding drum with a 1/2-inch diameter (1/8-inch shank),  one 1-inch sanding drum with a 3/4-inch diameter (1/4-inch shank), one 1-inch sanding drum with a 1-inch diameter (1/4-inch shank), one 1-1/2-inch sanding drum with a 2-inch diameter (1/4-inch shank), two 80-grit sanding sleeves in each size, and two 120-grit sanding sleeves in each size. Just pick your size, slide the sleeve into place, and tighten the bolt that appears on the underside of each drum. Perfect for your WEN Drill Press or your WEN 20V Max Lithium Ion Power Drill. Remember when you could reach the unreachable?
Features:
Features four sanding drums and 16 pieces of sandpaper
Perfect for your WEN Drill Press or your WEN 20V Max Lithium Ion Power Drill
Includes two 80-grit sanding sleeves and two 120-grit sanding sleeves in each size
Four sanding drums measure in at 1/2-by-1/2 inch, 1-by-3/4-inch, 1-by-1-inch, and 1-1/2-by-2-inch
Four sanding drums measure in at 1/2-by-1/2 inch, 1-by-3/4-inch, 1-by-1-inch, and 1-1/2-by-2-inch