E6013 - General Purpose / Mild Steel - Electrode - 14" x 1/8" (22 LB)

Description

Powered by
Frooition
All Items
See our eBay store for more great items >>
Shop Categories
Other
WELDING & CUTTING EQUIPMENT
OXY-FUEL EQUIPMENT
OTHER GAS REGULATORS
FILLER METALS
ABRASIVES
MAPP & PROPANE BRAZING TORCHES
WELDING CABLE
PVC VALVES
REFRIGERANT GASES
CARGO MANAGEMENT
GLOVES AND PROTECTIVE APPAREL
MAGNETIC HOLDERS
ELECTRODES OVENS/DRYERS
E6013 - General Purpose / Mild Steel - Electrode
Item Description
E6013 - General Purpose / Mild Steel - Electrode
Size: 14" x 18”
Package: 22 Lb
AWS/SFA 5.1 E6013
AC/DC +/- (Reverse or Straight Polarity)
General Purpose - Mild Steel
Description and Application
• All-position, mild steel electrode for welding light to medium-gauge steel
• Excellent operating characteristics when using small diameter electrodes to weld thin sheet metal using lower open-circuit AC voltage
• One of the easiest electrodes to use because of its easy slag control in vertical down welding, its wide operating range and restrike capabilities
• This electrode has a soft, steady and quiet arc that produces very little smoke or spatter
• Common uses include tack welding on thin sheet metal such as galvanized sheets, automobile bodies, metal furniture, window frames, fences, storage tanks, farm equipment and iron grills
Instructions: Clean the weld zone of contaminants as well as possible. A small AC machine or DC machine (electrode + reverse polarity or – straight polarity) can both be used! AC will prevent arc blow, DC+ reverse polarity produces deeper penetrating welds on medium gauge steels and DC- straight polarity on thinner or light gauge steels. Set amperage to the proper range as listed on the product recommended amperage chart. Maintain a short arc length and hold the electrode at a 15° angle and use a slight back and forth whipping motion. If overhead welding, use a straight circular motion. For vertical-down welding, choose amperage in the upper end of the recommended range and use stringer beads or a slight weaving technique keeping the weld puddle in place by pointing the electrode up into the puddle. For vertical-up welding, use amperage settings in the lower end of the recommended range and use the shelf or step method adding layer on top of layer. Do not use whipping motion. Allow the part to air-cool and remove slag with a chipping hammer and brush to a nice finish.
Other Common Welding Electrodes:
E6013 - General Purpose / Mild Steel - Electrode - 12" x 3/32" (5.5 LB)
E6013 - General Purpose / Mild Steel - Electrode - 12" x 3/32" (11 LB)
E6013 - General Purpose / Mild Steel - Electrode - 12" x 3/32" (33 LB)
E6013 - General Purpose / Mild Steel - Electrode - 12" x 3/32" (66 LB)
E6013 - General Purpose / Mild Steel - Electrode - 14" x 1/8" (11 LB)
E6013 - General Purpose / Mild Steel - Electrode - 14" x 1/8" (22 LB)
E6013 - General Purpose / Mild Steel - Electrode - 14" x 1/8" (33 LB)
E6013 - General Purpose / Mild Steel - Electrode - 14" x 1/8" (44 LB)
E6013 - General Purpose / Mild Steel - Electrode - 16" x 5/32" (11 LB)
E6013 - General Purpose / Mild Steel - Electrode - 16" x 5/32" (33 LB)
E6013 - General Purpose / Mild Steel - Electrode - 16" x 5/32" (44 LB)
E6013 - General Purpose / Mild Steel - Electrode - 16" x 5/32" (55 LB)
E7018 - General Purpose / Mild Steel - Electrode - 12" x 3/32" (11 LB)
E7018 - General Purpose / Mild Steel - Electrode - 12" x 3/32" (22 LB)
E7018 - General Purpose / Mild Steel - Electrode - 12" x 3/32" (33 LB)
E7018 - General Purpose / Mild Steel - Electrode - 12" x 3/32" (44 LB)
E7018 - General Purpose / Mild Steel - Electrode - 14" x 1/8" (11 LB)
E7018 - General Purpose / Mild Steel - Electrode - 14" x 1/8" (22 LB)
E7018 - General Purpose / Mild Steel - Electrode - 14" x 1/8" (33 LB)
E7018 - General Purpose / Mild Steel - Electrode - 14" x 1/8" (55 LB)
E7018 - General Purpose / Mild Steel - Electrode - 16" x 5/32" (11 LB)
E7018 - General Purpose / Mild Steel - Electrode - 16" x 5/32" (22 LB)
E7018 - General Purpose / Mild Steel - Electrode - 16" x 5/32" (33 LB)
E7018 - General Purpose / Mild Steel - Electrode - 16" x 5/32" (55 LB)
E6010 - General Purpose / Mild Steel - Electrode - 14" x 1/8" (4.4 LB)
E6010 - General Purpose / Mild Steel - Electrode - 14" x 1/8" (8.8 LB)
E6010 - General Purpose / Mild Steel - Electrode - 14" x 1/8" (22 LB)
E6010 - General Purpose / Mild Steel - Electrode - 14" x 1/8" (44 LB)
E6010 - General Purpose / Mild Steel - Electrode - 14" x 5/32" (4.4 LB)
E6010 - General Purpose / Mild Steel - Electrode - 14" x 5/32" (8.8 LB)
E6010 - General Purpose / Mild Steel - Electrode - 14" x 5/32" (22 LB)
E6010 - General Purpose / Mild Steel - Electrode - 14" x 5/32" (44 LB)
About Us
About Us
Payment
Shipping
Returns
Disclaimer
About Us
Mundaka Technologies, Inc is a US-based company with an inherited expertise of more than 35 years in the welding, cutting and industrial gases business. We serve the United States and the Latin American markets from our facilities in Fort Lauderdale FL. All of our products are selected with quality and affordability in mind. Our customer service team is always available and committed to answering our client's questions and needs. NO Answering Machines, NO Excuses.
Payment
Payment
We accept all major payment methods: PayPal, Visa, MasterCard, AMEX, Discover, and Bank Transfers. We charge 6% sales tax on all orders shipping within the State of Florida. We sell with tax exemption if we are provided by the customer with a valid Florida resale certificate.
Shipping
Shipping
We ship the same business day for orders placed before 15:00 EST. USPS Priority Mail (1-3 days) and FedEx Ground (1-5 days), are our preferred shipping methods and delivery dates may vary according to tho the final destination of the order. For smaller and lighter items we use USPS First Class (1-4 days). We offer free shipping to the 48 contiguous continental states.
Returns
Returns
If you are not happy with your product, just request a return on eBay or get in contact with us, We will accept your return and refund your payment, no questions asked!. If you changed your mind or bought a product by mistake, Just send it back! we will refund your payment. Is the product that you bought does not fit your current equipment, No problem, just call us and we will help you to find the right equipment for you and exchange it. We are committed to providing our customers with a solution.
Disclaimer
Disclaimer
Mundaka Technologies Inc offers products that can operate at high temperature, high pressure, and high voltage/amperage. These products are intended for professional or trained users. Mundaka Technologies does NOT sell any products intended to diagnose, treat, cure, or prevent any disease and the products bought from Mundaka Technologies Inc should never be used as a reference to measure or dosage medical oxygen or any other medical gases or substances to humans or animals. Mundaka Technologies, Inc. assumes no liability for misuses of this products. Some of the products offered here might be described as "Compatible with" other manufacturer´s equipment and brands. It is not in the Mundaka Technologies Inc intentions to resemble, copy, counterfeit or violate trademarks, patents, brands or any other form of intellectual property owned by other companies not affiliated, associated, authorized, endorsed by, or in any way officially connected to Mundaka Technologies Inc.
Helpful Links
Add to Favorite Sellers
Sign up to Newsletter
View Feedback
Contact Seller
Visit seller's eBay Shop
About Seller Page
More Items!
View more great items
Powered by
Frooition
Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js)
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.